The selection of the marble medallion is the most important part of the floor medallions production.the quality of the selection determines the quality, effect, artistry and value of the marble floor medallions. Generally, it is required to select a marble floor design with fine crystal grains, clear and uniform texture, substantially uniform color, and no cracks.
In principle, the selection of the material is determined according to the requirements of the specific parquet design or the materials required by the customer. If the customer does not have the material selection requirements, the country will issue the national inspection standard for the stone industry.
The selection of wall tile medallions needs to pay attention to these three aspects:
1, color
In the entire marble mosaic floor tile, the layout color of the same stone must be the same, but for some color differences (Simi, Jinxiangyu, Shanhuhong, etc.), there is a large color difference on the same plate. It is necessary to distinguish between plans.
The basic principle of material selection is: one is to select the material according to the principle of gradual color transition, and the second is based on the principle that the aesthetic decoration effect of the mosaic is not affected.
If the board surface effect is too bad to achieve good decorative effects or customer processing requirements, it is best to obtain the consent of the customer before processing.
2. Grain
In the processing of floor medallions, the change of the surface of the board is also very important. This is especially true for high-end products with high quality, high requirements and high artistic quality. The best change in texture should be combined with the design to better show the effect of the design. The specific texture direction depends on the specific situation, there is no absolute standard to refer to.
Generally, for a circular marble medallion, the texture can be in the circumferential direction or in the radial direction, but the consistency of the texture should be ensured regardless of the circumferential direction or the radial direction. For a marble floor medallions, the general image of the grain extends along the length direction, and can also radiate in the width direction or at the same time along the length and width directions.
No matter how the texture moves, the key point is how to achieve the design and decoration effect of the stone mosaic, in order to achieve the best decorative effect of the mosaic.
3. Color lines, stains, cracks, holes, trachoma, mildew
These stone defects are absolutely not allowed in terms of the quality of the parquet. But because stone is naturally generated, there are times when there is no way to control it. Therefore, many stone materials have more or less certain flaws.
Therefore, when we choose materials and materials, we must also consider these issues comprehensively. We can avoid them as much as possible, and we cannot avoid them depending on the specific situation. And these appearance defects should be repaired as much as possible. However, the range allowed is not to affect the overall decorative effect of the marble medallion.
At the same time, since the marble floor medallions are mostly made up of small pieces, it is possible to make full use of the remaining corners of the natural stone floor medallions production to process, but the premise must conform to the previous selection criteria.
