White travertine tile is commonly used in building exterior walls.White travertine has a white background,gray texture,light and soft color,high hardness,uniform surface lines and small changes.white travertine stone is the top grade of travertine.the color of white travertine pavers is noble, natural, well-proportioned texture, strong plasticity, not easy to leave scratches, no oxidation, no discoloration, no radiation, and easy to clean.white travertine pool coping color is not glaring. When the sun shines on, the paleontological fossils presented from the white travertine tile outdoor form natural patterns which is very suitable.
The holes of the white travertine tile backsplash should not be too dense, the diameter should not be greater than 3mm, and there should be no transparent holes. The water absorption rate should not be greater than 6%, and should not be greater than 1% after adding a waterproof surface layer. The freeze-thaw coefficient should not be less than 0.8 and not less than 0.6. The strength of white travertine coping is low, and the stone village of slabs should not be too large, generally should be controlled within 1m2.
Material | White Travertine | ||
Color | White | ||
Surface Finish | Polished, Honed etc | ||
Below are common sizes, customer’s design is available | |||
Common sizes, | Slabs | Size | 1800(up) x 600(up)mm |
Thk | 15mm, 18mm, 20mm, 25mm, 30mm, etc | ||
Tiles | Size | 305 x 305mm or 12” x 12” | |
Thk | 10mm,12mm,15mm,18mm,20mm,2.5mm,30mm, etc | ||
Countertops | Size | 96" x 26", 76"x36", 98”x26", 108" x 26" | |
Thk | 3/4", 3/8", 1/2” | ||
Vanity Tops | Size | 25"x22" , 31"x22", 37”x22" , 49”x22”, 60” x22” | |
Thk | 3/4", 3/8", 1/2” | ||
Edge Style | bullnose, ogee, bevel, eased, polish, etc | ||
Packing | 1. White travertine Tiles & cut to size in Fumigated wooden crates. inside will cover by foamed plastics (polystyrene). 2. Slab in the fumigated wooden bundle. | ||
Usage | Available in indoor and outdoor construction, such as floor,wall decoration, skirting board, stairs, facade, elbow board, squares, hotels, parterre, villas, parks, parking lots and other buildings. | ||
Quality | 1)Thickness tolerance (length, width, thickness):+/-1mm; sheet thickness tolerance:+/-0.5mm 2)Polished degree: above 90 degrees 3)No variation, no crack, no mark | ||
